Slip On Flange

1.Materials:

Carbon Steel:ASTM A105,ASTM A350 LF1,LF2,LF3,A36,ASTM A234 WPB,etc

Stainless Steel:ASTM A182 F304/304L, 316/316L,316Ti,321,317L,310S,etc

Alloy Steel:A182 F1,F5,F9,F11,F12,22,F22,F91,etc  

Duplex Stainless Steel: S31803(SAF2205),S32750(SAF2507),S31500(3RE60)

 

2:Standards:ANSI/ASME B16.5,B16.36,B16.47,AWWA C207,DIN,BS,SABS/SANS,MSS SP44,ISO,API Flange,etc

 

Dimensions & Masses of ANSI B16.5 Slip On Flange Class 150/300/600

ANSI, ASME, ASA, B16.5 150lb/sq.in. SLIP ON FLANGE RF / FF









øDbgmJhkHoleslKg.
1/2"88,911,134,930,222,315,960,3415,90,400
3/4"98,412,742,938,127,715,969,8415,90,700
1"107,914,350,849,234,517,579,4415,90,800
1 1/4"117,515,963,558,843,220,688,9415,91,100
1 1/2"127,017,573,065,149,522,298,4415,91,400
2"152,419,092,177,862,025,4120,6419,02,200
2 1/2"177,822,2104,890,574,728,6139,7419,03,600
3"190,523,8127,0107,990,730,2152,4419,04,100
3 1/2"215,923,8139,7122,2103,431,7177,8819,05,200
4"228,623,8157,2134,9116,133,3190,5819,05,600
5"254,023,8185,7163,6143,836,5215,9822,26,300
6"279,425,4215,9192,1170,739,7241,3822,27,500
8"342,928,6269,9246,1221,544,4298,4822,212,600
10"406,430,2323,8304,8276,349,2361,91225,418,500
12"482,631,7381,0365,1327,155,6431,81225,528,000
14"533,434,9412,7400,0359,157,1476,21228,636,000
16"596,936,5469,9457,2410,563,5539,71628,646,000
18"635,039,7533,4504,8461,868,3577,81631,750,000
20"698,542,9584,2558,8513,173,0635,02031,764,000
22"749,346,0641,2609,6564,479,4692,12034,972,000
24"812,847,6692,1663,6615,982,5749,32034,989,000


NOTE:

1. Class 150 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).

2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.

3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.

4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).

5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.


ANSI, ASME, ASA, B16.5 300lb/sq.in. SLIP ON FLANGE RF / FF









øDbgmJhkHoleslKg.
1/2"95,614,334,938,122,322,266,7415,90,700
3/4"117,515,942,947,627,725,482,5419,01,100
1"123,817,550,854,034,527,088,9419,01,400
1 1/4"133,319,063,563,543,227,098,4419,01,800
1 1/2"155,620,673,069,849,530,2114,3422,22,600
2"165,122,292,184,162,033,3127,0819,03,400
2 1/2"190,525,4104,8100,074,738,1149,2822,24,400
3"209,528,6127,0117,590,742,9168,3822,26,100
3 1/2"228,630,2139,7133,3103,444,4184,1822,27,500
4"254,031,7157,2146,0116,147,6200,0822,210,100
5"279,434,9185,7177,8143,850,8234,9822,212,500
6"317,536,5215,9206,4170,752,4269,91222,214,100
8"381,041,3269,9260,3221,561,9330,21225,424,800
10"444,547,6323,8320,7276,366,7387,31628,637,100
12"520,750,8381,0374,6327,173,0450,81631,750,000
14"584,254,0412,7425,4359,176,2514,32031,770,000
16"647,757,1469,9482,6410,582,5571,52034,990,000
18"711,260,3533,4533,4461,888,9628,62434,9112,000
20"774,763,5584,2584,2513,195,2685,82434,9133,000
22"838,266,7641,2641,2564,4101,6742,92441,3197,000
24"914,469,8692,1701,7615,9106,4812,82441,3208,000


NOTE:

1. Class 300 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).

2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.

3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.

4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).

5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.


ANSI, ASME, ASA, B16.5 600lb/sq.in. Flange SLIP ON FLANGE RF/ FF









øDbgmJhkHoleslKg.
1/2"95,214,334,938,122,322,266,7415,90,800
3/4"117,515,942,947,627,725,482,5419,01,400
1"123,817,550,854,034,527,088,9419,01,600
1 1/4"133,320,663,563,543,228,698,4419,02,100
1 1/2"155,622,273,069,849,531,7114,3422,23,100
2"165,125,492,184,162,036,5127,0819,03,700
2 1/2"190,528,6104,8100,074,741,3149,2822,25,400
3"209,531,7127,0117,590,746,0168,3822,27,300
3 1/2"228,634,9139,7133,3103,449,2184,1825,48,900
4"273,038,1157,2152,4116,154,0215,9825,411,800
5"330,244,4185,7188,9143,860,3266,7828,624,500
6"355,647,6215,9222,2170,766,7292,11228,629,500
8"419,155,6269,9273,0221,576,2349,21231,743,000
10"508,063,5323,8342,8276,385,7431,81634,970,000
12"558,866,7381,0400,0327,192,1488,92034,986,000
14"603,269,8412,7431,8359,193,7527,02038,1100,000
16"685,876,2469,9495,3410,5106,4603,22041,3142,000
18"742,982,5533,4546,1461,8117,5654,02044,4175,000
20"812,888,9584,2609,6513,1127,0723,92444,4232,000
22"869,995,2641,2666,7564,4133,3777,92447,6292,000
24"939,8101,6692,1717,5615,9139,7838,22450,8330,000


NOTE:

1. Class 600 flanges except Lap Joint will be furnished with 0.25 (6.35mm) raised face, which is not included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).

2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.

3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.

4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).

5. Dimensions of sizes 1/2 through 3 1/2 are the same as for Class 400 Flanges.

6. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.

 


"

Product Details

Message